The symbol must only be reproduced from master artwork - (please go to the - eQcheck Symbols section for master artwork). The eQcheck symbol must be accompanied by the trade mark symbol (tm) to denote that the certification mark is registered.

In certain countries (e.g. Canada, USA, UK, India and Hong Kong) the words "Certification Mark" must also be included directly beneath the symbol. This is a requirement of the certification mark Regulatory authorities in these countries.
The eQcheck mark must not be less than 10 mm high. The eQcheck should be produced in color, and may be reproduced in black on a white background. We allow limited use of single colour reproductions of our certification marks on tickets and on promotional material; this is subject to our prior approval.

The mark must be not reproduced on a multi-coloured or patterned background which visually distorts the symbol. Artistic distortion of the symbols is not permitted. The symbols must always be reproduced on their correct base lines - and not tilted from the horizontal.

Please take care in using our certification mark in close association with your own brand name or logo. Our mark must never appear as an integral part of a design which incorporates your brand name or logo. We can provide guidance if in doubt.

Our mark must be protected in print from any graphics or text intruding into the mark itself. We have established what we call an exclusion zone to provide a minimum area in which no other printed image may appear. The size of this exclusion zone (see .pdf files below for illustration) is related to the size of the symbol itself:

• a space equal to half the width of the symbol must be left on either side;

• a space equal to one third of the height must be left above the symbol; and

• a space equal to two thirds the height must remain beneath the symbol.

The eQcheck should be positioned so that the information contained can be readily seen by the consumer.